Cheap Temporary Fencing panels for sale price 2100mm x 2400mm OD 32 x 1.40mm light duty 14 microns zinc
It is consist of welded mesh panel,round tube frame(square tube frame),plastic feet and top connection. This kind of fence has a superior structure, the globality,mobility and environmental suitability is very good .The fence is easy transport , dismantle easily ,low cost . It has the advantage of one cost, many times used.
Material: hot dip galvanized tube and wire
Zinc coating: 200g/m2 on wire,300g/m2 on pipes
Hot Dipped Galvanized : Australian Standard-42 Microns.
Two type of Temporary fence
1. Welded tempoary fence 2. chain link temporary fence
Accessories of temporary fence
The clamp of Temporary Fence
---High quality Temporary Fence Clamps.
---Hot Dipped Galvanized TO Australian Standard-42 Microns.
---Specially moulded and 4 mm thick for additional strength.
Cemented plastic fence feet
---Standard specification:580mm long,245mm wide,130mm high
---Thickness of the block:2.5mm
---Hole diameter:25mm,32mm,42mm & 48mm
Our plastic fence feet offer the following benefits over standard concrete fence feet:
---Made of plastic which is made from polypropylene.
---UV5 for sun/weather protection.
---A piece of high quality steel bar for reinforcement.
---Post holes can run across or go up and down the blocks.
---Designed to be filled with concrete.
the fencing brace:
Temporary fence stays are used to support the temporary fence in high wind situations or on long runs to ensure the fence once erected remains secure.
Fence stays are hot dipped galvanised to Australian Standard - 42 Microns and are attached to the mesh panels by 2 clamps and weighted down by concrete filled plastic feet.
Applications of Hot dip galvanized Australia temporary fence
1. commercial construction sites 2. Domestic housing sites
3. Poll constructions 4. Mine sites
5. Concerts 6. Special events
7. Local council works 8. Short / long terms
9 . Building area 10. Exhibition
11. Swimming pools 12. sporting / playground
13. public events 14. outdoor kid safety
Temporary fence welded quality control
1. Use carbon-dioxide arc welding(CO2gas)
2. Anti -climb mesh infill
3. 360° weld between the vertical & horizontal pipe
4. High zinc coating on pipes 42 microns =300g/m2
Temporary fence produce process
Pre hot dip gal. wire drawing--- cut wire and pipes ---wire welded---cut the corners of the mesh---Pre hot dip gal. pipes welded-polish the welds-paint anti-rust epoxy-spray sliver powder coat on each welds-stacking-packaging
Specification of Temporary Fence
|
Specification
|
Popular
|
|
Panel Size:
|
2400mm(L) x 2100mm(H)
|
|
Frame:
|
32mm O.D.
|
|
Infill Mesh:
|
4mm horizontal, 4mm vertical
150mm x 60mm spacings
|
|
Weight:
|
22kgs
|
|
Finish:
|
Hot Dipped Galvanized to Australian Standard - 42 Microns
|
Recommended Specification of temporary fence
|
Specification
|
Spotted by 3-5mm diameter quality mild steel wire
|
|
Opening (mm)
|
75x75 75x100 60x150 50x50 60x60 etc
|
|
LxW (mm)
|
2100x2400 1800x2400 2100x2900 2100x3300 etc
|
|
Finish:
|
Hot Dipped Galvanized to Australian Standard - 42 Microns
|
Different specifications are available according to customers' special inquiry or detailed drawings.
Product Tags:
|
|
Cheap Temporary Fencing panels for sale price 2100mm x 2400mm OD 32 x 1.40mm light duty 14 microns zinc Images
|
